LODRA

Incline

The LODRA lightline is a built-in application. Its unique design ensures that there is no incline versus the surface where it is used (e.g. pavement, flooring, loading docks), so it will not hinder anyone. The unit is made from high quality aluminium, which rules out the chance of corrosion. The lens is made of layered and scratch-free glass, making it conform IK-10 standards. IK-10 is the highest degrees of protection provided by enclosures for electrical equipment against external mechanical impacts. It is therefore suited for use in heavy loaded conditions like industry, public roads and sidewalks.

 

Easy Installation

The LODRA is designed especially for quick and easy installation. The lightline is small in both width and height, which ensures that only a limited amount of material must be removed from the surface where it is placed. Subsequently, the unit can easily be placed at the same level as the surface and moulded if necessary. Every LODRA is provided with a 7.5-meter cable, which, in most cases, avoids having to make a weld.

 

User-friendly Design

The electronic components, including the LEDs, are completely sealed which makes them 100% protected against moist and dirt (IP68). The unit can handle temperatures between van -20°C and +60°C. Optionally even +70°C is possible. Since the controller is close to the LED strip inside the unit, it will not disturb the communication between the controller and the LED. The configuration of the LEDs in the LODRA is redundant; this means that in case 1 LED fails, the remainder of the LEDs will keep functioning. The unit itself will generate a failure report.

Communication Protocol

The software of the LODRA is developed in such a way that it can communicate with virtually every protocol available. Therefore, it can be integrated easily in existing light control protocols, whether it is used in traffic control systems, theatre lighting or building installations. The LODRA can be produced as an ‘active response’ version; the light will respond to movements close to the unit, avoiding unnecessary burning time.The LODRA LightLine is a ‘sealed for life’ product and does not require specific maintenance during its lifetime. In a worst-case scenario (LED failure) it can be easily repaired; both the LED and control unit can be removed from the topside. There is sufficient cable available to replace the unit if necessary.The lightline is available in sizes from 60 cm until 3 meters, allowing for any desired length. As the units can be interconnected, the lightline is virtually seamless.

Incline
The LODRA lightline is a built-in application. Its unique design ensures that there is no incline versus the surface where it is used (e.g. pavement, flooring, loading docks), so it will not hinder anyone. The unit is made from high quality aluminium, which rules out the chance of corrosion. The lens is made of layered and scratch-free glass, making it conform IK-10 standards. IK-10 is the highest degrees of protection provided by enclosures for electrical equipment against external mechanical impacts. It is therefore suited for use in heavy loaded conditions like industry, public roads and sidewalks.

Easy Installation
The LODRA is designed especially for quick and easy installation. The lightline is small in both width and height, which ensures that only a limited amount of material must be removed from the surface where it is placed. Subsequently, the unit can easily be placed at the same level as the surface and moulded if necessary. Every LODRA is provided with a 7.5-meter cable, which, in most cases, avoids having to make a weld.

User-friendly Design
The electronic components, including the LEDs, are completely sealed which makes them 100% protected against moist and dirt (IP68). The unit can handle temperatures between van -20°C and +60°C. Optionally even +70°C is possible. Since the controller is close to the LED strip inside the unit, it will not disturb the communication between the controller and the LED. The configuration of the LEDs in the LODRA is redundant; this means that in case 1 LED fails, the remainder of the LEDs will keep functioning. The unit itself will generate a failure report.

Communication Protocol
The software of the LODRA is developed in such a way that it can communicate with virtually every protocol available. Therefore, it can be integrated easily in existing light control protocols, whether it is used in traffic control systems, theatre lighting or building installations. The LODRA LightLine is a ‘sealed for life’ product and does not require specific maintenance during its lifetime. In a worst-case scenario (LED failure) it can be easily repaired; both the LED and control unit can be removed from the topside. There is sufficient cable available to replace the unit if necessary.The lightline is available in sizes from 60 cm until 3 meters, allowing for any desired length. As the units can be interconnected, the lightline is virtually seamless.